The MAC servo motor can be controlled with ±10V in speed or torque control with encoder feedback to master motion controller.
Furthermore the MAC servo motor can replace an arbitrary step or servo system being based on pulse and direction signals.
There is a build-in electronic gear so that the MAC servo motor can simulate all possible step resolutions.
Thereby the MAC servo motor can replace all step- and servo-systems without change in PLC/PC/controller software.
It is thus secured that adaptation / replacement of existing step motor/servo systems can be achieved quickly.
Parameters are set up via RS232 port from a Windows program.
The supply voltage is 24VDC or 48VDC (which is industry standard) for the 50-141 series, and 115/230VAC for the 800 series. A double supply facility is available so that position and parameters are maintained intact for example during an emergency stop.
The servo motors can be delivered in 6 models: 46, 92, 134, and 750W. NEMA23 and servo flange is standard so that the MAC servo motors can replace a step motor directly without mechanical changes.
Connection can be chosen as DSUB, Phoenix connector, M12 or cable glands. Backlash free and planetary gears in ratio 3, 5, 10, 20, 100 can be delivered from stock.